Surge Protectors: Their 7 Internal Components

Permalink 07/21/14 09:57, by Joel Boyette, Categories: Electronics , Tags: fuse, gas discharge arrestor, ground wire, metal oxide varistor, neutral wire, power wire, surge protectors, toroidal choke coil

Having damaged appliances probably means that your surge protector is ineffective against power surges. It also probably means that you need to replace your surge protector. Ask a seller if his or her surge protectors contain the following components.

1.Gas discharge arrestor

The gas discharge arrestor is a small, metal tube that's attached to the power wire. It releases neon gas when extra electric energy passes through it. The neon gas reduces extra electric energy to the correct amount. The neon gas also eliminates extra electric energy by transmitting it to the ground.

2.Ground wire

The ground wire is a thick, green wire that transmits extra electric energy to the ground. It also prevents you from acquiring an electric shock when a device is plugged-in to a surge protector.

3.Metal oxide varistor

The metal oxide varistor contains three components: metal oxide material and two semiconductors. The metal oxide material is a circular metal. The metal oxide material is covered in red, blue, yellow, green, or black covering.

The two semiconductors are joined together by a metal oxide material. One semiconductor is attached to the power wire, while the other semiconductor is attached to the ground wire. Surge protectors typically contain two to five metal oxide varistors.

surge protect

The electric energy is controlled by the metal oxide varistor when a surge protector is connected to a device. The metal oxide material forces electric energy to flow in one direction. The semiconductors force the right amount of electric energy through the power wire.

One semiconductor transmits sufficient electric energy to a connected device. The other semiconductor prevents extra electric energy from being transmitted to a connected device. The ground wire transmits extra electric energy to the ground.

The metal oxide varistor also prevents the connected device from being turned on and off.

4.Toroidal choke coil

The toroidal choke coil is a metal coil that contains an electromagnet. The electromagnet contains powdered ferrite or iron. The toroidal choke coil wraps around the power wire. It also prevents the plugged-in device from fluctuating. Surge protectors usually contain three toroidal choke coils. The toroidal choke coil also reduces or removes glitches shown by the plugged-in device.

5.Fuse

The fuse is a small, transparent tube that has a metal portion on both ends. It's attached to the power wire to determine if too much electric energy is transmitted to the plugged-in device. It heats up and cuts off the electrical current within the surge protector. Stopping the electrical current prevents the plugged-in device from being damaged.

The fuse needs to be replaced once it burns out because it can't be reused. It has to be replaced with another fuse that has a similar size. Replacing a small fuse with a large fuse can lead to a suddenly damaged device. Substituting a large fuse with a small fuse can also lead to a suddenly damaged device.

You can check the manufacturer's instructions about the size of the replacement fuse. The size of the fuse may range from 3 AWG to 13 AWG. AWG is an acronym for American Wire Gauge.

6.Neutral wire

The neutral wire is a thick, white wire that's attached to the ground wire and the metal oxide varistor. It may not be found in some surge protectors because it has a similar function as the ground wire.

7.Power wire

The power wire is a thick, black wire that transmits electric energy to the plugged-in device. Extra electric energy won't be diverted to another wire if the power wire is damaged.

You must always unplug your device from a surge protector. Devices that require less than 120-400 V should be plugged-in to the surge protector.

Hire A Masterful SEO company Before Your Site Is Lost at Sea

Permalink 07/16/14 10:25, by Edwyn Gray, Categories: SEO , Tags: seo companies, seo company, seo service, seo services
Long before GPS came into fruition, vessels would traverse the wide ocean and go into the unknown. With a compass and maps, brave men and women would venture out into uncharted waters and hope for the best. Many would be lost at sea, never to be heard from again. This same scenario is occurring in a proverbial state online. You may not see the connection, until you start to imagine the digital landscape that creates market share for every website on the web. If you do not hire a SEO company, your site will be like an old time ship, destined to be lost at sea.

The analogy may be hard to determine at first glance, as it seems to be far reaching. However, you will find that this is a matter of looking into how marketing can make or break your website’s reach. When you launch a website you are building items on a proverbial piece of real estate. That digital real estate is like an island in the ocean. Once in place, you will have to figure out a way to advertise, market, and gain influence across several different areas of the known online world. Without doing so, you will have to deal with the reality of being lost amidst the shuffle of other websites that are going to be focused on SEO, and even straight forward advertising protocol.

Keeping Up With Competition

When you start to read about internet marketing in today’s framework, you will realize that the purpose is to engage a global audience. You will need to do a lot of different things to get the attention of targeted audiences all over the online landscape. Whether you want to have a flood of traffic from a certain geographic location, or you want to usurp all the traffic that goes into one keyword phrase within search results, you will need to find a way to compete with others that are following protocol.

That could be as simple as updating your page with content all the time. A well updated and maintained website will draw attention. However, when you are going head to head with competitors, you will need to do something more than just update your site with visual media all the time. You will need to implement several branches to the marketing channels that you have in place. In fact, for every one blog post you should also focus on sharing through social media, updating video marketing channels, and distributing content through article directories.

Time Consuming Endeavors of Marketing

The reason why you should look into hiring a SEO company is because they will be able to designate the right amount of time to help you out. When you hire someone to work on campaigns for your site, they will give you the equivalent of 40 hours a week of work on your branding. That’s something that you will not be able to give. You may think that you have that kind of time, but there are so many moving parts that you’ll end up running into a serious issue straightway. Let’s assume that you were to work on your site’s marketing for 1 hour a day. A professional firm would trump your hour with several hours, and not only that, they would have a team of engineers working on the content, social media, on site optimization, and back link generation all at the same time. Your one hour will be trumped every time.

At the end of the day, search engine marketing is time consuming. It is not a fascinating world, it is not compelling, it is dry, boring, and likened to watching paint dry. You could definitely venture forward to this if you want, but you will find that you’re going to lose out on a great deal of time when you try to go the DIY route, which is why it’s often times better to just let a professional handle the marketing aspects of your website.

Do Websites Really Get Lost?

It happens every day. Well-meaning websites are left dormant, like abandoned amusement parks. Do some searching and digging around the internet graveyard and you will find that there are a plethora of sites that have hundreds of posts and a lot of content that once meant a great deal of influence on the web. However, they are now just relegated to the back pages of search results and will not gain any influence at all. Some of them have high page rank, but when you look to see if they get any traffic, you will be shocked by what you find.

The proverbial “lost at sea” happens a lot with websites, and it’s something that can occur with many well-meaning updates that you can do in regards to optimization. For instance, there are some people that update their pages and see no leaps within search engines. Some take shortcuts and search engines penalize the domain name. When you’re penalized or even delisted, it’s as good as being an island out in the Pacific Ocean, far away from civilization.

Analogies aside, it’s best to look into hiring a SEO company, than it is to work on your own internet marketing solutions. It will be evident within the first few months of implementation, guaranteed.

The Benefits You Get from Eliquid

Permalink 07/08/14 10:37, by Calvin Boykin, Categories: Health , Tags: best e liquid, e cigs, e juice, e liquid, e liquids, e smoking, ejuice, eliquid

If you smoke cigarettes for a good number of years, there comes the point when you think about the substances that you are inhaling and the amount of money that you shell out for your vices. You probably know what cigarettes give you – for the amount of nicotine that you need to take in, you are probably shell out around $2-3 for a pack of cigarettes. When you think about it, quitting cigarette smoking would definitely save you a lot of money.

You may be also considering quitting cigarette smoking with the health of others and the environment in mind. However, you may feel that you want to quit the cost, but not the nicotine. Thank the universe for the invention of the eliquid.

Eliquids, sometimes referred to as e-juice or vape juice, are the substances that create that make-or-break experience for first time e-cigarette users. These liquids are made out of either propylene glycol (PG) or vegetable glycerin (VG) or the combination of these compounds, water, nicotine, and flavoring. You may be wondering how the combination of these ingredients is able to make former cigarette smokers make the switch. The reason is that smokers may find the nicotine satisfaction from a device that does not give out CO2, stain their fingers, clothes, and teeth, and not worry about non-smoking signs. To top that, you get a huge amount of savings.

Sure, a vial of eliquid is much more expensive than a pack of Marlboros. However, a vial of 10ml eliquid gives you about 1800 puffs, while a stick of Reds would give you 9-15 puffs. Do the math in your head and you know that you have been wasting a lot of money on every pack that you bought over the years.

You are not inhaling any smoke, but rather, vapor. Since you are not burning anything to get the nicotine hit, you get satisfaction without doing damage to your lungs or to anyone around you. Eliquids also do not give out tar, which is responsible for the stains on your clothes and the yellowing of your teeth and your fingers. At the same time, you do not have to worry about the stench of tobacco smoke. That means that you also save up by not putting room perfumes and deodorizers in your shopping cart anymore. Scrap that – you do not need to purchase anything that you used to buy to remove the evidence of tobacco.

How about aiding you to quit cigarettes? While there is no specific evidence that the use of eliquids would definitely help any smoker to kick the habit, smokers can control the amount of nicotine that they take in. For those who are used to smoking regular cigarettes, they can choose an eliquid that contains the 15mg of nicotine per 1000 ml of liquid. Once they manage to lower the dosage without feeling that they are overcompensating their smoking, they would feel that they are able to manage to quit taking in nicotine. It would also aid people who need something to help them deal with oral fixation by using an eliquid with zero nicotine.

If you are not thinking about quitting smoking altogether, you can improve your smoking experience by being able to customize the way you smoke. With e-cigarettes available in the market that would imitate the texture of real cigarettes, you can enjoy bespoke smoking without the usual high cost of cigarette smoking. You can also choose to add fruit flavors or stick to the usual tobacco or menthol flavors.

When you think about it, you are probably missing a lot when you smoke cigarettes. If you want to enhance your smoking cigarettes, choose to go electric instead.

Proper Etiquette in Trading Pins

Permalink 07/08/14 10:16, by Robin Faircloth, Categories: Sports , Tags: baseball pins, baseball trading pins, custom baseball pins, custom trading pins, softball trading pins, trading pins

Pin trading has grown in popularity to collectors and sports fanatics over time. Some of the best bonds happened in different trading events and sports arenas because the trade-off allows people to interact. There are people who, even after trading pins, stay connected and turn to each other for information. And because some traders travel the world just to find and gather different kinds of pins, a lot of alliances happen across different languages and cultures. This only goes to show how pin trading can be beneficial for people who are finding a niche to fit it. Even on the internet where most people are hiding behind monikers and different images, there are connections that are formed because of online pin trading and dealings.

But like with most trade-offs and dealings, pin trading is a business. It needs a polite transaction between two parties in order to make the exchange work. And like in business, there are important protocols that you need to follow in order to make a successful trade. For beginners, acquiring trading pins from another trader might be a bit hard but that is where the experiences come from. After a couple of trading know-hows, you?ll eventually find yourself acquainted with the dos and don?ts of the whole process and before you know it, they?re already calling you a ?Pinhead.?

Here are some of the essential etiquettes that traders need to know in pin trading:

1.The trading pins that you are offering for swapping must always be in good condition. People avoid traders who are trading damaged pins and it might leave them a bad impression of you.

2.Traders usually sport their pins on their garments, accessories, lanyard, or a plain cloth. If you are interested in having one of their pins, approach them and ask politely. Point the pin that you?re interested in and wait for the other person to speak. Do not touch the pin unless the person allows you to. Traders will likely remove their pins if they are approached by someone interested in their collection. If you are interested with a pin but clueless about its details, ask the person to explain some important information regarding that pin.

3.Don?t pressure a person into a trade if he?s not interested in swapping a particular pin with you. Respect must always be observed in these events. The same rules apply to you: if you?re not comfortable about giving a certain pin to a trader, offer an alternate proposal.

4.Just like you, traders will ask for a specific pin in exchange of a pin that you want from his collection. After you both agreed to swap your desired pins, always thank the person and still be polite. Maintaining conversational decorum is important especially when language barrier is a part of your trade. If you are interested in making another trade, ask the person if he?s okay with it.

5.When an exchange between traders leads to unacceptable trade, offer an alternate proposal and wait for the trader to decide if he accepts it. You can suggest a different pin or bargain for a couple of small pins in exchange of the one that you want. If both parties still fail to meet eye-to-eye, just end the transaction and thank the trader for allowing you to inspect his trading pins.

6.If you are unsure about a trade or whether the value of the proposed pin is not worthy of your priced pin, ask someone from your group about it. It?s important that you are knowledgeable about the worth of your pins.

7.Don?t meddle in a trade happening between two other traders. It is best if you wait until their deal is done before you ask the person.

Got Involved in a DUI Accident? What?s Next?

Permalink 07/04/14 11:58, by Bradley Roger, Categories: Law , Tags: acciden, attorney, dui, police, public, utah, utah dui attorney



Here is the scenario: your close friend invited you over to a party in their house at 8pm. Why hesitate when both of you are going to different universities a few months from now? Of course you secretly snatched the car keys from your father?s wall-mounted storage box and drove your way to the party.

The drums and the beats of the music were cool and so were your high school friends who also showed up. Drinks were flowing and you just noticed it was late in the morning. You drive your way home drunk and uneasy. The next moment, you found out you are already out of your fantasies and you are under city police custody! What are you going to do? You are in Salt Lake City, driving under the influence (DUI) of alcohol, 18 years old, and nobody beside you to defend and explain things that happened.

To give you a brief background, Utah is one of the states in the US that frowns upon drunk drivers and imposes hefty fines on violators of its DUI laws. These facts are based on the public safety government website of Utah. According to its Driver License Division, the fine for the offense costs $1,000; for impound and towing, $250; for the Utah DUI attorney, $2,500; for education and treatment, $150; for victim reparations fund, $100; for the driver?s license reinstatement for each offense, between $65 to $235; for time off work and transportation, $300; and for the added high-risk insurance covering three years, $4,500. A total of more than $9000! I bet you would agree with me if I say I would rather spend that money buying expensive electronic gizmos, than to give it away because of my negligence!

Going back to the story of this guy who found himself behind bars, and if you were on his shoes, you could at least follow these simple preventive tips to lessen the aggravation caused by your actions. First thing you need to know is that cops observe you when you are driving at night. If you turn on your high beam lights even if there are oncoming vehicles, they will suspect you of driving under the influence of drugs or alcohol. If the police approached you by the window, do not say anything until he talks to you. Remember your rights to remain silent as whatever you say from the time you pulled off your car can be used against you.

Secondly, if you are minor-aged and under the custody of the police, you should call your immediate family for them to hire you the best available Utah DUI attorney that will orient and defend you about the probable actions the officials will do the next morning. Third, another important thing to keep in mind is not to incriminate you too much. When you are in court, answer only questions about your identity in a courteous manner and never ever expound and tell stories the prosecutor did not ask. Also refrain from admitting any acts of drinking any amount of alcoholic beverage when not asked. Remember that the private Utah dui attorney who is in charge of you will never put you in battle unprepared! Both of you will have a private conversation prior to the hearing of the case and he will tell you exactly what he sees will happen inside the court.

Finally, you should not spend an amount of money more than what is needed for a DUI defence. You don?t want to pay higher than the expected fines for the lawyer you hired. Research about other possible options and talk with your Utah DUI attorney for processes that will expedite the dismissal of your case. Both of you should work together.
 

Ordering Process in Purchasing Custom Military Coins

Permalink 07/04/14 08:03, by Howard Oakley, Categories: Military , Tags: challenge coins, custom challenge, custom coins, custom military coins, military coins

Memorabilia like custom military coins are important for people who worked in this field. Owning these coins is a sign of their pride in their profession and homage to sacrifices done by their fellow soldiers for the country while on duty. In ordering these coins, buyers want to know the ordering process to set their expectations.

Design generation

Coming up with designs is the first step in ordering customized coins. Buyers can opt to send their preferred designs or let the service provider generate one for them. Graphic artists may present the usual design of specific military branch’s insignias or create a new one according to clients’ requirements. A client may discuss his perceived output after designing. Designers will then create the design according to the received details.

In many cases, some buyers want to personalize the design according to their troops’ characteristics by using other design features. Clients must then provide their own designs for the designer to work on. Even if they wish to recreate an old design, buyers must also provide a reference copy to the designer where he will base the coin’s style.

Selecting coin shape

The term coins leave an impression of being circular in shape. However, custom military coins may come in various shapes like polygon, dog tag, and square shapes. Coin makers will punch out these shapes from the usual round coin and deliver as ordered by clients.

Choosing metal style and finish

Metal styles and finishes make coins special. Metal types range from gold, copper, silver, nickel and others, which give coins their valuable style. Finishes will refine the designs buyers want to attain in obtaining these memorabilia. Finishes come in polished and antique coats. Polished finishes bring out shine on coins, which make them look brand new. On the other hand, antique finishes make the coin look older, which also has its own style value.

Select additional coin options

Additional coin options range from embellishments and attachments that differentiate one cone from others. Custom military coins can have keychain attachments, diamond cut edges, and custom inserts among others. Engravings can be requested, particularly if coins are gift for special recipients.

After selecting all the coin elements, the buyer can send the details to the service provider for quotation and prepare their budget for payment.

Add-ons also include packaging choices as required by clients. Clients can go simple with usual PVC pouch packaging, which is usually available for free, or settle with more elegant packaging like velvet present box or coin case. The latter options may cost more, but their appearance alone makes them work investing.

Design proof and approval

If the buyer approves of the quoted amount, he will receive a design proof for the approval. The client will then check the design proof and approve if the design meets his expectation.
If the client is unimpressed, he can ask for revision until he is satisfied with the design output. Approval will also mean the client has to pay for the coins while the service provider prepares for production.

Manufacturing and delivery

The service provider can start manufacturing custom military coins immediately after design approval and payment. Manufacturing often takes around two to three weeks. By this time, the client should receive the coins complete with add-ons previously selected in the ordering process.

Ordering custom military coins is easy, particularly through a coin maker that provides vital information a buyer may need while shopping around. This will set the buyer’s expectations and be more confident in ordering these valuable items. With a reliable coin maker, clients can expect top caliber coins made from premium materials and crafted by skilled designers.
 

How Strong are Your Fireproof Safes?

Permalink 05/29/14 08:05, by Erik Payne, Categories: Safety Products , Tags: fireproof safes, safes, security
They protect your valuables and they can withstand almost everything you throw at them. Truly, fireproof safes are resilient to every form of attack. But even before these bulky heavy containers reached your office, they’ve already went through hell. They are given a battery of tests to assess their durability. In this article, you’ll learn about some of those testing methods.

The Underwriters Laboratories

UL is short for Underwriters Laboratories and you will be hearing a lot about them from fireproof safe manufacturers. UL is the leading authority in certifying the quality of every fireproof safe in the market. A lot of manufacturers pay millions to even get the opportunity to have their safes tested.

You can see the UL logos usually on the safe doors. The UL logo is accompanied with the safe’s fire and time ratings. A fire rating is an estimate of the internal temperature of a safe during a fire. A time rating is a measurement of how long the safe can maintain the internal temperature. As a customer you should pay close attention to these details because buying the wrong safe can be a decision you’ll regret.

UL Class 72

The current standard used for fire ratings is UL class 72, and it’s divided further into three more classifications: 350, 150 and 125. For fireproof safes containing paper, a class 350 is enough. Class 150, on the other hand, is for electronic media like hard drives. Electronic devices need extra protection since they are heat sensitive. Even more heat sensitive devices require class 125 safes.

How are they tested?

Underwriters Labs conduct three sets of tests for fireproof safes: fire endurance, fire and impact endurance, and an explosion test. With each test, UL tries to find out how much the safes can handle by exposing them to different real-life scenarios.

Fire endurance

This is the basic durability test for all fireproof safes. In this test, UL simulates the temperatures experienced by safes during a fire. The safe is filled with paper and digital devices, which decides the effectiveness of the safe. To measure temperature, UL installs thermocouples on every side and within the safe. However, for class 150 and 125, humidity sensors are also installed within the safe. The humidity sensors check how much of the water within the safe has evaporated. Evaporated water might look harmless. But, once they attach to the contents of the safe, they can be damaged. Moreover, old paper can deteriorate faster in a very humid setting.

The safe is then exposed to heat. After reaching the optimum temperature, the oven is turned off. The safe is then left to cool. Most safes fail the test because although the oven has been turned off, the safe is still extremely hot. This causes the contents of the safe to eventually reach flashpoint and burn.

Fire endurance and impact testing

In this test, the safe is not only exposed to extreme heat but also thrown out a thirty-story building! The safe meets a fateful demise as it lands on a pile of bricks. If the safe is stored in the upper levels of a building, the safe will fall down eventually after the flames eat the building’s foundations. However, in a real scenario the safe will be crushed by other debris which can crush it. For the final round, the safe is put into the oven again, but this time upside-down.

Explosion test

In a worst case scenario, pressure builds up within a safe and then explodes. UL tests a safe’s resistance to explosions by heating up the oven. And then, opening and closing the safe doors quickly. If the safe blows up within 30 minutes, the air that has entered the safe built up too much pressure. In very rare cases, manufacturers push the limits by exposing a safe model to all three tests!

Understanding the History and Utility of Printed Circuit Board

Permalink 05/06/14 14:05, by Alfred Goodwin, Categories: Electronics , Tags: pcb, printed circuit board
The printed circuit board is the base of most electronics including computer components. Circuit boards are composed of a specified number of copper conductive layers, each of which has a substrate in between them. These conductive layers are then laminated together to create a circuit board. Circuit boards have drilled holes in them also called “vias.” Vias are either riveted or electroplated, making the connections electrical.  

The very first printed circuit board was invented in 1936 by Paul Eisler, an Australian engineer. Eisler, a Vienna University graduate, created the circuit board as a component of a radio that he developed while he is in Hempstead, England. Eisler was an illegal alien in England, and upon his release in 1941, he started looking for investors to fund his invention. A Camberwell-based lithography firm took interest. The firm offered a contract which Eisler signed without reading. The company obtained the rights to Eisler’s ideas. Nonetheless, in 1943, Eisler was able to acquire patents for other printed circuit boards used in other applications other than radio. The US military noticed Eisler’s inventions where it used the circuit boards in creating bomb detonators. The bombs were used in countering the Germans’ military technologies. After the war, the US government gave the public the access to use printed circuit boards for commercial applications.

Further, there are many processes involved in manufacturing a printed circuit board. First, a substrate is needed where the copper layer will be put above it. Second, the layer will be etched so that the copper residue will be removed. Etching will leave only the adequate copper amount required. Third, holes are then drilled into the substrate-and-copper. A laser or a tungsten-carbide drill will be used in drilling the vias although this will depend on the size of the vias. Fourth, specific areas of the board will be plated where the components will be put. Fifth, texts, if there are any, will be printed using a screen-printing procedure. Sixth, the circuit boards will be prepared for testing. After testing, seventh, the board will be populated with the wirings for its desired application.    

The first circuit boards were used for industrial and military utilities. Today, circuit boards are used as the foundation of various electrical devices, components and hardware. One will find a printed circuit board in radios, televisions and cellular phones and other such devices. If you own an electronic device, you will probably find a circuit board inside if you will disassemble it. Circuit boards can be big or small and usually green in color. However, some circuit boards today come in red or blue colors. Regardless of its color, you will find copper lines and dots on the surface of the board.  

Nowadays, most industries are using either rigid or flexible circuit board or both. The type of printed circuit board usually depends on the substrate used in manufacturing it. Flexible printed circuit boards are created to complement the requirement for miniaturization. We are living in a mobile era thus the need for thinner and lighter devices that we can carry anywhere we go. Flexible printed circuit boards which are smaller, more flexible and with higher wiring density is regarded as a solution. These printed circuit boards can be wired three-dimensionally. They can also be shaped according to the available space.    

Evidently, the printed circuit boards that we came to know since Eisler’s have become more versatile in its form and application. Regardless though, for sophisticated equipment, components and devices, high quality printed circuit board must be a priority since they can hold the wirings and components together longer. Aside from technical expertise, the right material and drill can make a difference. Thereby, entrust your circuit board needs only to professionals.

Where to Buy Affordable Golf Equipment

Permalink 04/16/14 12:33, by Ryan Conner, Categories: Accessories , Tags: golf balls, golf clubs, golf equipment

Golf equipment is undeniably expensive and most of the time unaffordable especially to beginners in the sport. Anyone who has been looking for discounts is definitely aware that these are never easy to find. But this doesn’t mean that an aspiring golfer cannot run into equipment that will not use up his bank account savings.

In search for the most affordable golf equipment, this article lists down five places where an amateur golfer can purchase gears without the need to spend every penny in his pocket.

Retail and Specialty Stores

golf equipmentPhysical stores selling golf paraphernalia with good quality are surely just around the corner. There is a bigger possibility to snag a good deal from retail and specialty stores because a golfer can visit each store and compare prices. It is also essential to carefully look into advertisements and try to find out whether the store is in fact selling at a lower price or just posting a high-priced item as a sale.

The best technique to find a bargain is to take some time to shop around. The first few places that one can check out are retail or golf specialty stores that are about to close down or those offering clearance or closeout sales. These stores will surely be offering amazing discounts on sport gears as the golfing season comes to an end. The best time to visit is during the winter when playing golf is never ideal.

Golf Course

A golf enthusiast who was not able to find bargains in retail and specialty stores can hit the nearest golf course. Believe it or not, a golf course oftentimes houses the newest and the most modern golf equipment. The best time to visit a golf course is when the new season is about to begin. This is basically because the equipment from the last season will be taken out which means that a golfer can save more money.

Classified Ads

Another place to find golf gears is the classified ads page in the local newspaper. The best thing about checking out this page is the fact that a buyer does not need to spend money to pay for shipping fees especially if the item can be found within the neighborhood.

Garage and Yard Sales

Another recommended location where golf gears can be found is a garage or yard sale. There might be some neighbors, who are golf enthusiasts and are getting rid of their old equipment. This might just be the place for a beginner to get golf clubs at more affordable prices.

Online Sellers

If all else fails, the most recommended thing that a golfer can do is to stay at home or inside the office and browse the internet. Yes, in this era, an individual will surely not be disappointed since the number of online sellers of golf equipment is continuously increasing. It is very important for a buyer to check all available sellers on the internet and make sure that they are legitimate to avoid being scammed.

The best thing about buying online is that most prices are less expensive because sellers are not paying for store space. This is also because there are so many sellers that they come up with the best yet competitive equipment prices.

There will also be downsides associated with online buying. First of all is the shipping fee. This usually depends on the proximity of the buyer’s place from the seller’s location. Simply said, the farther the place the higher the amount of shipping fee needed. This basically means that the total amount can be a bit expensive. Another negative aspect of buying online is the mere fact that a buyer cannot see the item physically. This makes inspecting the preferred equipment more difficult.

Anyone who chooses to purchase used golf gears must make sure that the equipment are not damaged or broken. The golf enthusiast must thoroughly inspect the equipment to make sure that these are properly working.

Choosing Misters for Outdoor Use: 3 Tips

Permalink 03/13/14 13:50, by Ryan Conner, Categories: Small Business , Tags: mister, misters, misting fan, misting system, misting systems

Having a cold atmosphere in a wide outdoor area is just not possible with standard air conditioning units. This is why misters were designed as they can negate heat in a wide area, indoors or out. In fact, there are several systems which can turn the heat down by 35 degrees or more. To get the ideal atmosphere with these misting systems, without getting anything covered by a layer of water, here are 3 tips to keep in mind.

1. Choose Quality over Price

A lot of people buy misters with a cheap price while foregoing their technical specifications. What they get is a system that works more like an elaborate sprinkler than a full fledge misting device. In essence, they get any person wet to cool them. When looking for misting systems, it is necessary that one pays attention to their pressure system. This will determine how fine the water droplets are being emitted by the nozzles.

In outdoor areas, a system should have high-pressure so it can cover a wider area than those found indoors. A high-pressure system will project a fine layer of mist that is strong enough to negate the heat as they evaporate but light enough that they don't even register on the skin. This results in immediate cooling with none of the dampness.

2. Seek Professional Help

Buying misters of the counter without any form of professional help will lead to various results with none being the best. If one tries to install a misting system by their own, the result could be too cold, too damp or just taking up too much energy than what is intended.

Instead, hire the help of someone that can look into the design of the system so that it could properly provide you with the cold air you need. A misting professional will be able to look into factors like height of the installation, number of misting lines and area needed to be covered by the system. In short, guidance from a professional should always be sought whenever taking in tasks that one has little to no familiarization with. Fortunately, a lot of the designing help is being given for free by most misting system suppliers.

3. Lay it All Out

When having misters installed at outdoor areas, the best scenario is that every corner of the landscape is being covered by a curtain of light mist. This means that one has to work hand in hand with the designer so every part of the area will be within the range of the system.

Installing misters all around the area will trap the cooler air in while keeping hot air out. The proper layout will also eliminate the presence of hot spots or places where the temperature is a bit higher than the others. With the right design, then end result will be a system that keeps the heat off while keeping everyone as comfortable as possible. Once installed, any outdoor area will transform into a cool yet natural oasis any person can relax in amidst the heat of the sun.

Author Bio

Auramist the leading manufacturer and provider of the highest quality Misting fans, Misters, Misting Systems and innovative cooling Fans.

:: Next >>

©2014 by Ryan Conner

Contact | Help | b2evo skin by Asevo | VPS hosting | François